Heat Insulation Tapes

Start with whether the exhaust surface can glow red-hot. - Yes, it can glow → Ceramic Fiber Tape - No glow but still hot → Special Glass Fiber Tape - No glow and not very hot → any of the three All else being equal: choose special glass fiber for non-itching handling and no smoke or odour; choose basalt fiber when cost comes first. Full decision steps: material selection guide.

Do not compare the numbers directly — the three products use different semantics: | Product | Semantics | Value | | --- | --- | --- | | Ceramic Fiber Tape | Long-term operating | 1050 °C | | Special Glass Fiber Tape | Long-term operating | 1000 °C | | Basalt Fiber Tape | Long-term / maximum | 600 °C / 800 °C | Also note: 1760 °C (ceramic) and 1300 °C (special glass) are refractoriness values, not service limits. Values follow the website. See data governance.

No. All three are woven tapes supplied without adhesive backing; a separate fixing method is required.

| Product | Thickness | Width | Roll length | | --- | --- | --- | --- | | Ceramic Fiber Tape | 2.0 mm | 50 mm | 5 / 10 / 15 m | | Special Glass Fiber Tape | 2.0 mm ± 0.2 mm | 50 mm ± 3 mm | 2 / 5 / 10 / 15 m | | Basalt Fiber Tape | 1.5 mm + 0.5 mm | 50 mm + 5 mm | 5 / 10 / 15 m | The TDS records fewer roll lengths than the website (missing 2 m and 30 m) and needs updating. Quote from the website values.

Yes. Please include: company, country/region, product, application, target temperature, required size, estimated quantity, and packing or label requirements. Target temperature is the single most important item — without it no correct material recommendation is possible.

Yes. The basalt TDS states "OEM / PRIVATE LABEL / BULK SUPPLY". Please provide your label, packaging, roll length and expected volume so the project can be assessed. Minimum order quantity and lead time are not recorded in the current material and must be confirmed separately.

Fix it mechanically with stainless-steel ties or clamps. None of the three products has adhesive backing, so adhesion alone is not enough. What to avoid: - Ceramic fiber tape contains metal wire and must not be used for electrical systems or cable insulation. - Do not treat 1760 °C / 1300 °C as service temperatures — they are refractoriness values. - Do not install while wet (the ceramic TDS requires the product be kept dry). - Use protection when cutting and avoid inhaling dust. The previous website copy said "304 stainless-steel ties", but the TDS says only "stainless-steel ties" with no grade. That detail needs confirming. Full detail: installation and fixation guide.